System constuctions
The thermal break system SYKOTHERM 70 of SYKON for windows and doors responds
completely to the international standards of quality control .
The heat insulation coefficient is achieved with the multi-chamber polyamide.
The SYKOTHERM 70 of SYKON is the most appropriate solution for heavy constructions
of high specifications, because of the fact that the combination of weight,
quality, technical solutions of heat insulations and static solutions is one
of the best in Europe. The gaskets are made of EPDM, a material which is tough
in time and weather conditions according to the standard DIN 7863.
Sykotherm series 70 of SYKON
is suitable for opening, tilt and turn and tilt and sliding constructions.
The opening and the tilt and turn mechanisms are distinguished in two categories
:
- Conventional mechanisms
in which the hinges are and
- Mechanism where the
hinge is not visible
The accessories of SYKON have the trademark of the company as also they have
a colour certification from RAL.
Except the windows SYKON
offers special designed profiles for entrance doors opening inwards or outwards,
as well as folding doors.
The polyamide with the two chambers ensures heat insulation without the limitation
of needed space for accessories like multiple locks, electric opening panic
bars etc.
Basic characteristics
of windows
- Polyamide 36 mm with
three chambers
- Heat insulation according
the standard DIN V 4108-4 :2002-02 with heat insulation coefficient Uf=1,8
W/(m2*K)
- Sound-proof in category
ÉV according the standard DIN 4109
- Anti-burglar category
WK1 êáé WK2 according DIN ENV 1627
- Frame's basic width 70
mm, sash's 80mm and depending on the static needs of the construction mullion's
width up to145mm.
- Single and double leaf
windows, opening right or left, inwards and outwards with tilt and turn or
tilt and sliding mechanisms.
- The accessories are made
of stainless steel, handles from aluminium or polyamide in many shapes with
or without lock.
- Windows with mechanism
in which the hinge is not visible.
- Tilt and turn mechanisms
for curved or beveled windows.
- The profiles are produced
according to standard DIN17 615 ,from alloy Al Mg Si 0.5 EQ according DIN
1725.
- The gaskets as also the
vulcanised corners are according DIN 7863
- Special profiles for
angles 90°, 135° and 180°
- Frames can embrace glazing
up to 51mm and the sashes can embrace glazing up to 61mm
- Surfaces anodized or
colour coated even in two colour profile because the assembly of thermal break
can occur after their colouration.
Basic characteristics
of doors
- Polyamides 26 mm with
two chambers
- Certification of heat
insulation from IFT Rosenheim according EN ISO 10077-2 Uf=2.4-2.5 W/(m2*K)
- Anti-burglar category
WK1 according DIN ENV 1627
- Frame's and sash's basic
width 70 mm and depending on the static needs of the construction mullion's
width up to145mm.
- Single and double leaf
doors opening right or left, inwards or outwards. Double action doors
- The accessories are made
of stainless steel, handles from aluminium or polyamide in many shapes. Locks
with 5 locking points.
- The profiles are produced
according to standard DIN17 615 ,from alloy Al Mg Si 0.5 EQ according DIN
1725.
- Can embrace glazing up
to 51 mm
- The gaskets as also the
vulcanised corners are according DIN 7863
- Surfaces anodized or
colour coated even in two colour profile because the assembly of thermal break
can occur after their colouration.
